New Pedal Board Accessories released this week, all retail for $30.

These accessories can be used with the Pedal Board Tamer, or for many other uses on your Pedal Board.

Momentary Tap Switch with RCA output to remotely tap the tempo of your effect. Can be used on anything that needs a momentary switch closure.

Momentary Tap Switch with 1/4″ output. Diode isolated outputs on both Tip and Ring, so you can tap 2 pedals at once. Or use a mono cable to tap a single effect.

Stereo to mono break-out box. Can be used to route 2 guitars into the Stereo input of the Pedal Board Tamer, or to route the output of the Pedal Board Tamer to 2 separate Mono cables. Or anywhere you need to convert a stereo cable to 2 mono.

Jon:

I got the pedal board tamer in on Friday (liked the “high caliber guitar ammo” tube).  Here’s a photo taken this weekend.

I dismantled my old pedal board and made a big rats nest of wires on the carpet to test things out.  Great product.  What I especially appreciated was the true tone that came through the pedal.

Over the last couple years (running through about a dozen pedals) I found that my guitar kept getting duller. The crisp tones I heard when I went guitar – 10ft cable – amp weren’t there when I ran through my pedal board even with all pedals off.  I changed cables went to George L’s and reconfigured the pedal configuration many times to try and recover some of the lost jangle.  I made some gains but never reached that true guitar to amp tone I always went back to as a default.

This weekend after plugging all the pedals into your PBT I of course had to do the test.  So with nothing on I played the guitar then immediately unplugged from the PBT and went straight into the amp.  I was delighted to hear that my tone through the PBT was just as true as the tone straight into the amp.  There was no volume drop or added hiss and there was no loss of string attack.  I prefer fairly bright settings (American Ash body tele, LP classic with P90s and Gretch Anniversary hollowbody with TV Jones pickups are the guitars I mainly play) and all of the brightness and bight of my tele and P90s and all of the ring of the Gretsch hollowbody came right out when I ran through the PBT.  So thank you for recovering much of the tone I’ve been looking to get back.

Now to make a new pedal board where everything can fit.  And I’ve already had 2 other friends want to come check it out so maybe they’ll order from you soon.

Thanks again.

Matthew Kelly

Tap tempo delay, with up to 700mS of delay, and some unique features such as:

Brake function.  Hold the Tempo Switch, and the delay slows down.  Release it is does one of three things, selectable by toggle switch:

1. Stays where you left it.

2. Snaps right back to where it was.

3. drifts back slowly to where it was.

Knobs include: Level, Mix, Feeback, Delay, Modulation, Brake toggle, and tap divide toggle.

Tap Divide toggle selects between 1/4, *1/8, and 1/8.

The original analog signal is mixed with the digital delay, for the ultimate in sound quality. 

Pictures coming soon, or come on down to Nashville this weekend to see on in person! 

Check out our new Tap-A-Whirl Video demo, by our favorite Demo Guru, Thomas Schuber of Gear Gossip.  Also be sure to check out our YouTube channel, and see our new demos.

The new Never Off Louder is shipping NOW!  This is the same circuit as the More Louder, but without the bypass system.  Can be used as an always on buffer, or in a looper set-up, such as the Cusack Pedal Board Tamer.  The Scream and Scruzz will be built and shipping late this week as well.

Michael Guy Chislett has the new Pedal Board Tamer, and is putting it on his board this week.  Once he gets it done, he’ll be shooting a demo video for me.  I’ll update my photos, and link the demo when it’s done.  In the meantime, here’s some old photos of Michael and his pedalboard…

We have obsoleted the Pink More Louder, and replaced it with the new Teal More Louder.  Available now for only $119!.  Get them while they last at this price…

To get your free T-shirt, simply order a Pedal Board Tamer or at least 2 Pedals and add a T-Shirt to your order.  You’ll get charged for the T-shirt.  Just go ahead and pay and we’ll issue a refund for the T-Shirt amount when we ship.