The Tiny Tap Delay is the "Never-Off" version of the Tap-A Delay.
All the features of the Tap-A-Delay in a package half the size of a Screamer! You read that right, a fully featured Tap-A-Delay that is a quarter of the size of the original.
Note: “Never-Off" pedals do not come equipped with true bypass switches, or battery power capability. These products are meant to work with a switcher system.
-Mix (dry/delayed signal)
-Delay (time can be set with the knob, or by pressing the Tap Speed switch twice. When tapping the tempo, the Divide toggle selects 1/8, *1/8, or 1/4 notes)
-Modulation (an 8-position switch that selects several warm modulation themes as well as a few outer space themes)
-Brake toggle (selects brake function; Left: holding the brake will alternate between slowing down and speeding up. When you release the switch, it stays right where it was; Center: ”Snap Back." Holding the switch will either slow down or speed up. When you release the switch it snaps back to the original tempo; Right: “Slide Back." Slide Back is the same as Snap Back, except the tempo slides back to the original tempo slowly. To select between Speed Up and Slow Down for the Slide and Snap modes, just tap an external foot switch (sold separately) and the internal tactile switch simultaneously.
Internally, there is also an “Echo Roll Off” pot that adjusts the tone of the repeats. All the way up is bright, with a lot of clock noise coming through. All the way down is very dark. 2 o’clock seems to be a good “middle ground.”
-Standard center negative 9V DC supply (not included)
-Current draw: ~28mA
-2.37" L x 2.17" W x 1.21" H